free_spin_pawl_for_5_shot_rugers_|_single-actions_-_proboards">

Free Spin Pawl for 5 Shot Rugers | Single-Actions - ProBoards">Free Spin Pawl for 5 Shot Rugers | Single-Actions - ProBoards.

Free Spin Pawl® This allow the shooter to take advantage of being able to rotate the cylinder in either direction for easy reloading. Works when the gate is opened. Might require some gunsmithing alterations. Designed for Ruger Vaquero, Blackhawks, Super Blackhawks, some Clones, and Single Six. Patent # 6,385,888. I attempted to install one in my stainless Single Six 32H&R and eventually gave up. The carry-up and timing was not right and perhaps I don’t know enough how to adjust the pawl. I reinstalled the factory pawl. The instructions are good with the Ron Power Free Spin Pawl but I’m not sure they always work. Just for clarification, the mods and aftermarket free spin pawl are for the old Vaquero's. They help when loading because the old Vaqs will over rotate easily requiring a go around to load. The new Vaq's already have the free spin pawl. I'm sure Ruger did them like this to help cure the easily rotating problem.

POWER CUSTOM RUGER® SA FREE SPIN PAWL™ | Brownells.

. How difficult is installation of a PC free spin pawl? Thread starter 4MUL8R; Start date Apr 5, 2011; Help Support Ruger Forum: Apr 5, 2011 #1.

Vaquero - Cylinder & Slide.

Free spin pawl | Rimfire Central Firearm Forum.

Or purchase and install Ruger's or Power Customs free spin cyl pawl for another $30 or so. SOLUTION 3. Install a Power Custom replacement 1/2 cock hammer about $125. By cocking the hammer to 1/2 cock the NMs will work just like OM Rugers by aligning the chamber and loading gate.

Free spin pawl | Ruger Forum.

Redesigned pawl enables faster and easier loading/unloading of Ruger single action revolvers. Holds the bolt away from the cylinder locking notches when the loading gate is open, so the cylinder can rotate freely in either direction. No need to spin the cylinder around again if you miss a click and go too far; makes it easier to set an empty.

Retrofit reverse indexing pawl system | Ruger Forum.

. The following is a list of some of the more commonly used and offered services available here at Bozeman Trail Arms. While I can do more things than are listed here it would be best to e-mail me at for a free estimate/quote or simply to see if I'll even be able or want to do it. I'm not as desperate to depart from. New Vaquero (.45 Colt) NM midframe blackhawks,.44 special,.41 special (mag nee.357 anny) NM.44 mag flattop All are free spin now. Taking out the set screw & plunger ALMOST makes it free spin - you still have to slightly modify the tip of the pawl (about 3- file swipes, depending on your personal filing style and your revolver's tolerance stack), and it does not affect proper cylinder.

ruger_vaquero_pawl_-_sass_wire_-_sass_wire_forum">

Ruger Vaquero Pawl - SASS Wire - SASS Wire Forum">Ruger Vaquero Pawl - SASS Wire - SASS Wire Forum.

GrandMasters L.L.C., Gunsmithing, Ruger 10-22, AK-47, Ruger, AR-15, Ruger Accessories GM Free Spin Pawl for Ruger® Single Action [PC-REV-011] - Patent # 6,385,888Allows the shooter to take advantage of being able to rotate the cylinder in either direction for easy reloading. Works when the gate is opened. Might require some gunsmithing alterations. An action job was the spot to begin. As part of this, Bill wanted to install an aftermarket trigger and hammer by Ron Power, along with his free-spin pawl. These parts are precision machined to exact tolerances and super hardened for long life.

"free_spin"_|_rugerf_-_ruger_enthusiast_&_owner_community">

FREE SPIN" | RugerF - Ruger Enthusiast & Owner Community">"FREE SPIN" | RugerF - Ruger Enthusiast & Owner Community.

So I figured I would be buying the new pawl, so I went ahead and modified the one that was already in the Ruger. I took the gun apart and got my dremel and ground down the pawl, as per the instructions. It took about 4 assemblies till I finally removed enough of the pawl for the cylinder to spin free in both directions (with the gate open). Install Power Custom Free Spin Pawl: Allows cylinder to rotate in either a direction. Chamfer & Polish Cylinder Charge Holes. only $179.99. Clean, Oil, & Adjust. Cost (Labor Only) REVOLVER. $ 45.00* SEMI-AUTO. $ 45.00* *Heavily fouled or rusted guns will incur additional charges. $ 40.00. Barrel & Action Work.

Installing a free spin pawl